Notice: Trying to get property 'display_name' of non-object in /var/www/html/wp-content/plugins/wordpress-seo/src/generators/schema/article.php on line 52
keyboard_arrow_uptop

 The following article, written by Keith Woolner with Rany Jazayerli, appeared in Baseball Prospectus 2001.

Table of Contents

History of PAP

The Pitcher Abuse Point system (PAP) first appeared in Baseball Prospectus 1999. Rany Jazayerli developed PAP as a common sense quantification of the idea that a pitcher who throws high pitch counts is at significant risk for injury and/or ineffectiveness. Research going back to Craig Wright's "The Diamond Appraised" has suggested a 100 pitch count limit for developing pitchers.

Abuse Points are awarded to a starting pitcher after he has thrown 100 pitches in a start. At first, one Abuse Point is awarded for each pitch, but at each successive plateau of 10 pitches, the penalty for each pitch rises by one. In other words:

PAP totals are further adjusted by a factor dependent on age, reflecting the relative immaturity and continued development of a young pitcher's arm. These adjusted PAP totals are referred to as Workload.

Since its introduction, PAP has proven popular as a way to assess a team's tendency to overwork its starting rotation. However, there hasn't been the solid sabermetric analysis to support any particular pitch count metric (including PAP) to date. We will try to rectify that situation this year.

Areas of Investigation

There are two related effects we are interested in studying. The original intent of PAP was to ascertain whether a pitcher is at risk of injury or permanent reduction in effectiveness due to repeated overwork. And in particular, does PAP (or any similar formula) provide more insight into that risk that simple pitch counts alone?

In addition to the long-term picture, there's been an increasing awareness that there are immediate effects of a long start. Pitchers appear to struggle for several starts after being asked to thrown 130 pitches. Do long pitch count outings reduce a pitcher's effectiveness for a period of time afterwards?

Short-term ineffectiveness

In this article, we will focus on the second of the two questions, namely whether high pitch count starts have a deleterious effect on a pitcher's effectiveness in the days and weeks immediately following. A separate article examining the long-term risk of injury will follow.

Data set to be studied

Using data from The Baseball Workshop/Total Sports, I looked at all starts for which there was reasonably complete pitch count data during the years 1988-98. For each start, I looked at all starts by the same pitcher in the preceding 21 days, and the following 21 days, and tallied the aggregate performance for the before and after periods. Note that the start itself is not part of either group, so the fact that long starts tend to be of higher quality will not affect the results.

Performance measurements

I opted to look at 4 rates of performance to determine whether pitchers were affected by long outings. They are:

  • Run average (RA)
  • Hits per inning (H/IP)
  • Strikeouts per inning (SO/IP)
  • Inning pitched per game started (IP/GS)

IP/GS indicates whether a pitcher's ability to throw late into a game has been affected. H/IP and SO/IP indicate whether a pitcher's "stuff" has been affected, and RA is, of course, the bottom line as to whether a pitcher is giving up more runs to the opposition.

Let's look at RA as an example. For every pitcher's start, I computed his total RA for all previous starts both in the 3 weeks prior, and the 3 weeks following. The ratio of the RA(after) to RA(before) is greater than one if he gave up runs at a higher rate following the start, and less than one if he was more effective thereafter. I can compute the ratios for the other starts similarly. I grouped all the starts in a given range, say 100-109 pitches, and aggregated their before and after starts and computed the ratios. I plotted the ratios as a function of the pitch count, as shown on the following chart:

 


 
(Click for full-size image)

The interpretation of the data this chart is that for pitch counts in the range of 100-109 (X axis = 100) pitchers experience about a 3.8% increase in RA the 3 weeks following the start than they did in the 3 weeks immediately prior to it.

The chart shows both promising and surprising results. Perhaps most surprising is that there is a persistent trend for pitchers to do slightly worse in the later time period, regardless of the length of outing. There are several factors that may account for this, including the general warming trend in most ballpark climates between April and August, and the resulting boost to offense that accompanies higher temperatures. Pitchers, on the whole, may simply wear down over the course of a season, making the later time periods of any stretch appear slightly worse. There is also a survival threshold that comes into play — after a stretch of bad starts, a pitcher may lose his spot in the rotation (or be sent to the minors). There will be few or no starts in the "after" period of this bad stretch to look for a bounce, but the starts preceding the bad stretch will have the bad starts figured into their "after" periods. Regardless of the contributing factors, the important point to note is that the baseline expectation is not a 1.00 ratio, indicating equal performance before and after any given start, but rather a slight decrease in effectiveness across the board in the weeks following an outing of any length.

Looking at specific points in the chart, outings of 130 or more pitches certainly seem to result in worse run prevention in the weeks following. This is consistent with the hypothesis of the negative short-term impact of high pitch counts. However, the rest of the chart seems to indicate the reverse, namely that pitchers are more effective having thrown more pitches, peaking with an outing of around 120 pitches. It even appears that a 90-pitch outing is more harmful to short-term effectiveness than a 130-pitch outing. Is this an indication that pitchers benefit from a regular workload heavier than previously thought, or is something else going on?

Endurance differences

One possible explanation is that there are significant qualitative differences between pitchers who throw 90 pitches per start, and those who throw 120 pitches per start. Good pitchers are more likely to throw deep into a game, as are those perceived as having more endurance. Pitchers with low pitch counts either get lit up early, are considered fragile or lacking in stamina, or are being carefully nursed back to health following an injury.

To investigate this possibility, I divided the pitchers into two categories, based on how many pitches they were typically allowed to throw. For each pitcher, I looked at whether the majority of his starts were above or below the average number of pitches thrown by starters in that season. Based on that ratio, I assigned him to "High Endurance" (>50% of starts above league average pitch count) or "Low Endurance" (<50% of starts above league average pitch count).

There are pronounced differences in the quality of pitchers in the two subgroups:

ENDUR  #PITCHERS   ERA    RA
HIGH        1105  4.06  4.28
LOW         1822  4.85  5.10

Given the differences in quality, we shouldn't be surprised to find that high endurance pitchers account for a dramatically larger portion of the starts above 100 pitches. Furthermore, the fact is that the number of pitches thrown is not a random variable. Instead, it is primarily a managerial decision made, based in part on the performance of the pitcher in the particular game. Indeed, high endurance pitchers account for significant more of the long pitch outings than the short pitch outings:

NP        % HIGH
70-79      39.7%
80-89      43.1%
90-99      56.4%
100-109    70.9%
110-119    79.8%
120-129    86.7%
130-139    91.2%
140+       91.2%

One obvious effect of this is that higher pitch count outings should be of better quality, on average. The following table showing ERA and RA for starts of a certain number of pitches confirms this:

NP     GS  #PITCHERS   ERA    RA
50    563        340  5.25  5.54
55    724        391  5.14  5.39
60    954        443  5.06  5.30
65   1359        504  4.87  5.11
70   1815        549  4.74  4.99
75   2349        588  4.74  4.98
80   2965        607  4.67  4.92
85   3582        620  4.61  4.85
90   4074        608  4.49  4.74
95   4365        596  4.43  4.67
100  4431        573  4.41  4.66
105  4086        531  4.28  4.52
110  3475        474  4.20  4.44
115  2645        418  4.14  4.37
120  2066        371  4.09  4.32 
125  1381        299  4.05  4.25
130   817        226  3.96  4.15

While this data establishes the rather intuitive point that good pitchers throw more long outings than bad pitchers, this isn't enough, on its own, to establish that the RA ratio chart above is affected. If both low and high endurance pitchers both share similar proportional declines in performance. Let's examine the pitch count data for each group:

 


 
(Click for full-size image)

Low endurance pitchers not only throw fewer pitches per start, but they decline significantly more than high endurance pitchers do from start to start. In fact, the best decline performance by low endurance pitchers is worse than the worst decline performance from high endurance pitchers. In fact, we may speculate that part of the reason that low endurance pitchers aren't allowed to throw more pitches is their inconsistency from start to start. Any effect from pitch counts is being overwhelmed by their own inability to maintain a high level of performance, as is evidenced by the erratic relationship between pitch counts and short-term decline for low endurance pitchers.

This study, then, will focus on the short-term effect of high pitch count outings among those pitchers regularly counted upon to throw deep into a game. This makes practical sense, as well, as the controversy on pitch counts isn't about whether the Sean Bergmans of the world are being overworked, but rather whether quality pitchers who are relied upon to pitch lots of innings, like Kerry Wood, Livan Hernandez and Rick Helling, are.

Initial results

Let's look again at the change in RA before and after a high pitch count start, focusing only at the high endurance pitchers. Note that for the sake of clarity, references to pitchers throughout the rest of this discussion will refer to our high endurance subset of pitchers, unless specifically stated otherwise:

 


 
(Click for full-size image)

As you can see, there's a strong trend for pitchers to allow more runs following a high pitch count outing. A typical high endurance pitcher gives up 7% more runs per inning in the three weeks following a 140+ pitch outing that the three weeks immediately prior. Once again, those measures are:

  • Run average (RA)
  • Hits per inning (H/IP)
  • Strikeouts per inning (SO/IP)
  • Inning pitched per game started (IP/GS)

Let's plot all four ratios against pitch count:

 


 
(Click for full-size image)

All four indexes are relatively constant in the 90-100 pitch range, but show significant declines in effectiveness as pitch counts rise, particularly after 120 pitches. Note that the high IP and SO ratios mean the opposite as high RA and H ratios — a decline in innings pitched or strikeout rate is bad, while a rise in hits or runs allowed means trouble for a pitcher.

The Performance Index

To estimate the overall effect, combining the effect of run prevention and endurance with the leading indicators of pitcher dominance, I averaged the ratios into a single "Performance" index. To get the "good" direction pointing the same way for all of ratios, I inverted the SO/IP and IP/GS ratios to make high values less desirable. The ratios, along with the average index are shown on the chart below.

 


 
(Click for full-size image)

If we design a metric that is a function of the total number of pitches thrown, and matches the shape of the curve shown above, we would have a reasonable good indicator by which the cost of a long outing on near-term performance could be measured. Notice that the shape of the curve is flatter at the beginning, and gets steeper and steeper as the pitch counts get higher. This is clearly not a linear trend, but a nonlinear (with increasing slope) function.

As it turns out, PAP was designed to show this same kind of behavior. It is reasonable to wonder, then, how well PAP matches the observed shape of the Performance Index.

PAP vs. Performance Index

For all of the performance metrics we will analyze, there are certain parameters that define the metric maps to the Index curve. I have set all the functions to match the performance index at the NP = 100 and NP = 140 levels, and observed how the curve matches the shape of the points in between. The NP=100 level was selected because it matches the first point of continuous decline in any of the indexes, namely strikeout rate. Some of the other metrics may not show substantial decline until higher pitch counts, but strikeout rate appears to be an "early warning system" of trouble ahead.

Let's begin with the original definition of PAP:

 


 
(Click for full-size image)

The classic formulation of PAP shows the right basic shape, but the slope does not curve as sharply as the performance index does. It overestimates the effect of a 120 or 130-pitch count outing.

Next, we should consider other functions that share the structure of PAP that may a better match to the empirical data. I parameterized the PAP function so that the threshold at which PAP starts to accumulate (originally 100) and the step at which another Abuse Point accumulates (originally 10) can vary. For example, we could investigate a PAP function that starts accumulating point at 110 pitches, with an increment of 5 pitches. We'll refer to these modified functions as PAP(THRESHOLD,STEP), as in PAP(110,5) or, for classic PAP, PAP(100,10).

 

 
(Click for full-size image)

The reduction in the step from 10 pitches to 5 increases the slope, but does so throughout the curve. The change of threshold to 110 pitches mitigates this, as we don't start the curve until later into the outing. Let's look at another PAP function, this time PAP(100,1) — that is, starting at 100 pitches, and adding 1 for the first pitch, 2 for the second pitch, 3 for the third pitch, and so on for every pitch thereafter:

 


 
(Click for full-size image)

It's evident that despite our best efforts, a PAP formulation that relies on the semi-linear increase in abuse points doesn't fully capture the relationship between high pitch counts and reduced effectiveness. Let's then look at other nonlinear functions that show more dramatic curvature. A quadratic relationship (PAP = (NP-100)^2 if NP > 100, 0 otherwise) is shown below.

Other PAP formulae

 


 
(Click for full-size image)

This shows some improvement, over but still not dramatic enough to really match the curve in the critical 120-140 pitch area. Now, let's look at a cubic relationship (PAP=(NP-100)^3 if NP>100, 0 otherwise):

 

 


 
(Click for full-size image)

The cubic PAP function provides a near perfect fit with the overall trend in the performance index. In particular, the fit between the value of 120 and 140 is uncanny. We have discovered a simple mathematical relationship between the length of a start, and the expected impact on a pitcher afterwards.

Reformulating PAP

With the empirical data now at hand, Rany and I have considered some adjustments to PAP. In particular, the cubic relationship between pitch count and ineffectiveness needs to be built into the system. We'll designate the system as PAP^3, to distinguish it from classic PAP, and define it thusly:

PAP^3 = { 0 if the start has fewer than 100 pitches,

(NP-100)^3 if the start has 100 or more pitches

}

One may reasonably wonder how the PAP^3 system compares to classic PAP. I've changed the scale of PAP^3 to match the range of PAP so that the differences may be seen more easily in the table below:

NP   PAP   PAP^3  ScaledPAP^3
 95     0       0            0
105     5     125            0
115    20    3375            5
125    45   15625           21
135    80   42875           59
145   125   91125          125

Generally speaking, PAP^3 is more forgiving on pitch counts between 100 and 135 than classic PAP was, though the penalties for going much above that level are considerably steeper.

One unfortunate side effect of this reformulation is evident in the table above. Though the formula for PAP^3 is simple enough, the numbers for PAP^3 grow large very quickly. For example, a 129-pitch outing has a PAP^3 of 24389, but few people would be able to cube 29 in their head. However, there is a mathematical relationship that can help us out here – logarithms. While this doesn't change the nature of the underlying relationship, it does allow us to categorize starts with smaller numbers. Group starts by the log of their PAP^3 totals. Specifically, I'm using base 10 logs, not natural logs.

Log(PAP) Category  Pitch Range   Risk of Short-term Decline
     ---        I        0-100               Virtually none
     <=2       II      101-109                 Minimal Risk
       3      III      110-121                Moderate Risk
   4-4.5       IV      122-132             Significant Risk
   4.5-5        V         133+                    High Risk

For example, a 114 pitch count outing has a PAP^3 of 2744, and the log(2744) is 3.43, which makes it a Category III start. I used Roman numerals to designate the categories simply to indicate that we are consolidating starts into broad categories rather than precisely measuring a specific effect.

The categories are divided largely by the integer portion of LOG(PAP), except between categories IV and V. Otherwise, the Category IV starts cover too broad a range of expected risk factors (pitch counts of 122-146, or expected declines of about 1% to well over 6%). Still, the categories are ultimately based on empirical analysis, and should be easier to discuss sabermetrically, as in "Livan Hernandez had 10 Category IV starts, and 4 Category V starts, which is way too high. Dusty Baker needs to lay off."

Sample results

For the 2000 season, the totals in each category are:

CATEGORY  #STARTS
    I        2592
   II         977
  III         885
   IV         346
    V          52

The individual leaders in each category for 2000 were:

 

We can also look at the "average category" of a pitcher's starts. The pitchers with the highest average category (minimum of 10 starts) are:

PITCHER               GS   AVG_CAT
Hernandez,Livan       33     3.152
Johnson,Randy         35     3.057
Leiter,Al             31     2.871
Williams,Woody        23     2.783
Wolf,Randy            32     2.750
Helling,Rick          35     2.714
Martinez,Pedro        29     2.655
Clemens,Roger         31     2.613
Ponson,Sidney         32     2.563
Stein,Blake           17     2.529
Mussina,Mike          34     2.500
Person,Robert         28     2.500
Pettitte,Andy         32     2.469
Schmidt,Jason         11     2.455
Hampton,Mike          33     2.455
Park,Chan Ho          34     2.441
Miller, Wade          16     2.438
Dempster,Ryan         33     2.424
Benson,Kris           32     2.406
Colon,Bartolo         30     2.400

Conversely, only one pitcher with 10 or more starts had all of his starts in Category I: Dave Eiland. Others with low average game started category include Todd Stottlemyre, Sean Bergman, Mike Johnson, Dwight Gooden, Brian Rose, Bronson Arroyo, Jeff Fassero, Hideki Irabu and Pete Schourek.

Limitations of the Study

We should interject a few notes of caution here. First is that we haven't yet established what PAP was originally designed to measure — risk of injury from overuse. We've been investigating a related (and initially easier to assess) phenomenon — short-term ineffectiveness following high pitch count outings. PAP^3 should not, at this point, be used as a proven indicator of health risks. At best, it should be taken as an early warning indicator that a pitcher is being pushed too hard. It says nothing about whether a pitcher can fully bounce back to his previously established level of performance given enough rest and a more sensible workload. Another research article will have to address the injury implications of heavy workloads.

It's also important to remember that the aggregate performance index curve is really the result of pitchers with differing capabilities, physiques and endurances. Randy Johnson may be able to throw 130 or more pitches without ill effects, while Jason Schmidt may suffer when asked to go more than 90 pitches. However, it is difficult, if not impossible, with present record keeping and medical knowledge to ascertain where a particular pitcher's threshold is. The PAP^3 system is an amalgamation of the performance of all pitchers, and is a general indication of how pitchers, as a group, respond to workload.

Lastly, the PAP^3 formula has only been validated for pitch counts that range up to 140-149. While this is mostly sufficient for recent seasons (starts of 150 or more pitches amount to only 0.14% of all starts since 1988), there's no a priori reason to expect that the cubic relationship holds at, say, the 180-200 pitch level occasionally reached by pitchers in years past. In fact, given the nature of the system. Is a 180-pitch outing 8 times worse than a 140 pitch outing, as PAP^3 would suggest? That implies a 38% decline in the pitcher's performance index, a truly gigantic amount, pushing a league average pitcher (say, 4.50 RA) to below replacement level (about a 6.21 RA). The true estimate of very high pitch counts may have to wait for historical pitch count data, or a change in the game restoring the conditions of the dead-ball era, or at least the 1960's.

Conclusions

How significant is the effect we've identified? Assuming a fairly abusive usage pattern across a staff, a team's starting rotation could suffer a season-wide decline of about 2%. Considering the effect on both the innings pitched (putting more strain on the bullpen) and extra runs allowed by the starting pitchers, this might amount to perhaps 20-25 runs over the course of a season, which would be expected to be about 2 to 2.5 games in the standings. That's comparable to the difference in value between Tim Hudson and, say, Kevin Tapani or Todd Ritchie in 2000. That's a trade worth making.

The implications for pitcher usage are rather straightforward; starting pitchers should, in general, be held to 121 or fewer pitches (Categories I, II, and III). There are some circumstances where this need not apply — if winning today's game is of significantly higher strategic importance than the pitcher's next few starts (e.g. playing a division rival during a pennant race). Also, if a manager believes a pitcher is physically superior in endurance than other pitchers, he may judiciously allow him to throw deeper into games. Naturally, the state of the bullpen and the rest of the starting staff may also figure into the decision — a 5% decline from David Wells is still a better pitcher than Roy Halladay. However, even though extenuating circumstances may call for pushing a workhorse starter to a Category IV start (up to 132 pitches), or even a low Category V start, it should be viewed as nearly inexcusable to let a starting pitcher exceed 140 pitches in any start.

Managers who allow pitchers to throw too many pitches in a start may not be only jeopardizing that pitcher's future, but hurting his current team's chances at success as well. For the benefit of another half inning of work from a tired starter, a manager may be gambling with that pitcher's next 4 or 5 starts at the very least. The evidence shown here shows that a season-long strategy to maximize the effectiveness of a pitching staff through managed workloads makes sense, even under an urgent "we need to win now, the future will take care of itself" philosophy.

Thank you for reading

This is a free article. If you enjoyed it, consider subscribing to Baseball Prospectus. Subscriptions support ongoing public baseball research and analysis in an increasingly proprietary environment.

Subscribe now
You need to be logged in to comment. Login or Subscribe